RDP WRAPPER

Download it from the link below

https://github.com/stascorp/rdpwrap/releases

Steps for usage

1. Download the .zip version and extract the file.

2. Run install.bat, it will restart the REMOTE DESKTOP service. After re-login, the following interface will appear:

You can see Successfully installed.

1. Open RDPConf.exe to check whether it is available:

If the installed version contains the current windows version, it can be used directly:

If the not listening [not supported] prompt appears, the installed version does not support the current version of windows.

You can run winver to determine the current windows version, and then find the corresponding rdpwrap.ini sent by others in the github issue to replace the old rdpwrap.ini file in the C:\Program Files\RDP Wrapper directory.

If you can’t replace it, just select copy, paste and replace. The new version of the 1909 version already has a replaceable version in the issue.

Version 1909 (OS Build 18363.418) available.ini as follows:

https://github.com/stascorp/rdpwrap/files/3863419/rdpwrap_10.0.18363.476_1909.zip

After the replacement is successful, running RDPConf.exe will show fully support

If the status still shows [not supported], restart REMOTE DOSKTOP SERVICES and verify again.

When you get fully support You can now use remote desktop by Multiple Users.

The post How to use RDP WRAPPER for Multi Remote Desktop Sessions? appeared first on Linux Windows and android Tutorials.

Exchange Server 2019 requires Windows Server 2019. Exchange Server 2019 brings a new set of technologies, features, and services to Exchange Server, the messaging platform that provides email, scheduling, and tools for custom collaboration and messaging service applications. Its goal is to support people and organizations as their work habits evolve from a communication focus to a collaboration focus. At the same time, Exchange 2019 helps lower the total cost of ownership. whether you deploy Exchange 2019 on-premises or provision your mailboxes in the cloud.

This article will illustrate step-by-step Installation of Exchange Server 2019.

Pre-Requisite:

There are pre-requisite for smooth installation of Exchange Server 2019.

Hardware & Software Pre-requisite:

• Operating System:           Windows Server 2019 Standard/Datacenter edition (Latest updates)
• Processor:                          64-Bit
• Memory:                            128 GB Recommended
• Disk Space:                        30 GB free space for Exchange Installation
• File System:                 NTFS
• Active Directory Schema: AD Forest Functional Level Windows Server 2012 or Higher

.Net Framework Supported:

• Exchange 2019 Version CU4 to CU8         .Net Framework 4.8
• Version CU2, CU3             .Net Framework 4.8 or Net Framework 4.7.2
• Version RTM, CU1            .Net Framework 4.7.2

Supported Clients:

• Microsoft 365 Apps for Enterprise
• Outlook 2019, 2016, 2013
• For Mac for Office 365
• Outlook 2016 for Mac

Important Links:  

1. You need KB3140245 to apply registry keys to enable TLS 1.1 & 1.2 support for Windows 7.
2. Click to download .NET Framework 4.7.2 or Higher.
3. Download Visual C++ Redistributable Package for Visual Studio 2013.
4. Install Unified Communications Managed API 4.0.

Installation Steps:

1. .Net Installation

No need to click on Windows Update.

• Visual Redistribute Package Installation

• Install Unified Communications Managed API

No need to click on Windows Update.

After click on Finish, Reboot the computer system.

• Installation of IIS and other windows components with PowerShell. Open Windows Power Shell and run following commands
• Install-WindowsFeature NET-Framework-45-Features, RPC-over-HTTP-proxy, RSAT-Clustering, RSAT-Clustering-CmdInterface, RSAT-Clustering-Mgmt, RSAT-Clustering-PowerShell, Web-Mgmt-Console, WAS-Process-Model, Web-Asp-Net45, Web-Basic-Auth, Web-Client-Auth, Web-Digest-Auth, Web-Dir-Browsing, Web-Dyn-Compression, Web-Http-Errors, Web-Http-Logging, Web-Http-Redirect, Web-Http-Tracing, Web-ISAPI-Ext, Web-ISAPI-Filter, Web-Lgcy-Mgmt-Console, Web-Metabase, Web-Mgmt-Console, Web-Mgmt-Service, Web-Net-Ext45, Web-Request-Monitor, Web-Server, Web-Stat-Compression, Web-Static-Content, Web-Windows-Auth, Web-WMI, Windows-Identity-Foundation, RSAT-ADDS

This command will install server pre-requisites.

Download the ISO Image of Exchange 2019 from the Microsoft Website and mount the Image in the server where you want to install Exchange 2019.

Click on Setup to begin the Exchange 2019 installation

Select Connect to the Internet and check for updates if you have internet and you need to download and updates for the exchange 2019 else you can check Don’t check for updates right now and click on Next

Press Next.

Click I accept the terms in the license agreement and Press Next

Select Use recommended settings and press Next

Choose Mailbox Role, here Management tools is default selected, If you want to install EDGE in the server, Select Edge Transport Role

Note: You can select automatically install Windows Server roles and features that are required to install Exchange Server to install all the required items for Exchange 2019
Click on Next

Specify the Exchange Organization here. Please carefully type the name of Organization. After selection of Exchange Organization you can’t change it later.

If you change it then you have to re-install complete domain.

Click next once you have decided and typed Exchange organization.

Click on Next.

Successfully you have installed Exchange Server 2019.  It is best practice that you should reboot your Exchange Server after successful installation.

The post Step By Step Installation Exchange Server 2019 appeared first on Linux Windows and android Tutorials.

How to create a shared folder in Windows Server 2019/2016

The first thing you have to do is right-click on the folder. Then go to Properties.

Then, click on Advanced Sharing.

Then check the Share this folder box and assign a name for the resource. You can also limit the number of users who can access the folder.

How to view shared folders in Windows Server 2019/2016. Using the file explorer.

Through the file explorer it is possible to access multiple resources. It is also possible to access shared folders. However, before doing so it is necessary to make a configuration. With this intention it follows the following path: Control Panel>Network and Internet>Network and Sharing Center>Advanced Sharing Center. Once there, you must check two boxes: Turn on network detection and Turn on file and printer sharing.

Now you must go to the file browser. Now you only have to click on Network. And then, you will have access to the shared resources.

How to view shared folders using the Run command.

Using this command it is possible to access various server settings. To view the shared folders, please press the Win+R combination and run the following command:

fsmgmt.msc

Pressing enter will open an MMC console. Once there, a series of important information is displayed. For example, name, location and type of share. In addition to active connections and their description.

How to view shared folders on Windows Server using CMD.

It is also possible to access the CMD console to view shared folders. Once the command prompt is displayed, please run the following command:

net share

As you can see, we will get the name of the share on the server. In addition to the path and description assigned. On the other hand, to remotely access a shared folder, please use the following syntax:

net view \\computer /all

How to view shared folders using Windows PowerShell in Windows Server 2019/2016.

It is also possible to access these resources from PowerShell. With this intention, run the following command:

Get-WmiObject -class Win32_Share

To view the shared resources of a computer on the domain network, please run the following syntax:

Get-WmiObject -class Win32_Share -computer COMPUTERNAME

How to view shared folders using Server Manager.

This is a central administrator that allows you to manage multiple aspects of the server. To see the shared folders please click on File and Storage Services.

Then click on Shared. There you will see the shared folders on the server.

In this way we have analyzed how to view shared folders in Windows Server 2019/2016. In addition, there are several methods at your convenience. Bye!

The post How to view shared folders in Windows Server 2019/2016 appeared first on Linux Windows and android Tutorials.

Reasons to set password expiration policies.

There are several reasons to set up password expiration policies on Windows Server:

• Temporary users.
• Users who are doing study practices in the company.
• Users whose contract expires. Consequently, the administration orders the deactivation of the account in a determined period of time.
• Test users.
• Security controls

Edit password expiration policies with local policies in Windows Server.

The first method we will see is to edit the local directives. With this intention press the Win+R combination and run the following command:

gpedit.msc

Consequently, it follows the following path: Local Computer Policy>Computer Configuration>Windows Settings>Security Settings>Account Policy>Password Policy.

Once there, several configuration parameters are displayed:

• Enforce password history: This parameter allows you to determine how many new passwords are related to a user. Consequently, it avoids assigning a previous password again.
• Maximum password age: Through this option you define the number of days of use of a password. Even before Windows Server requests the change.
• Minimum password age: With this alternative it is possible to define the number of days of duration of the password. Before being modified by the user.
• Minimum password length: It allows you to define the minimum number of characters in the password.
• Minimum password length: It allows you to define the minimum number of characters the password will contain.
• Password must meet complexity requirements: Determines how passwords should be set with complexity parameters. For example, combination of symbols, numbers, capital letters, etc.
• Storage passwords using reversible encryption: This configuration is related to certain applications. In fact, these are protocols that require knowledge of the user’s password for authentication purposes.

Edit password expiration policies with domain policies in Windows Server.

With this in mind, it is necessary to login to the server manager. Once there, please go to the Tools menu. Then click on Group Policy Management.

The following menu will be displayed immediately.

Please display the forest, and then the domain. Once there, right click on Default Domain Policy.

This window will then be displayed.

Please follow the path below: Default Domain Policy>Computer Configuration>Policies>Windows Settings>Security Settings>Account Policies>Password Policies. As you can see, there are the same options as in the local directives. However, the most important difference is the scope of application. That is, by making changes locally, you can’t modify the domain’s directives. On the contrary, from a computer in a domain it is possible to modify the policies. With this intention, double-click on Maximum Password age.

You can see that for security reasons it is set at 42 days. On the contrary, if you set it to 0 then the password will never expire.

In this way we have seen how to configure password expiration policy local or domain mode in Windows Server 2019/2016. This way you increase the security of the system. All right, that’s it for now. Please keep an eye out for updates on Windows Server. Bye!

The post Configure password expiration policy local or domain mode in Windows Server 2019/2016 appeared first on Linux Windows and android Tutorials.

The importance of a virtualization platform like Hyper-V

We have previously highlighted the importance of using a virtualization environment. Indeed, at the level of Windows Server it represents a great advantage. It allows you to test systems and apps in a secure environment. Since any failure or error would not represent a threat to the system or its users. Within a corporate environment, it is a great security measure. Likewise, domestic and professional users can test new systems. Or even polish apps without fear of damaging the main system. Well, in this post we will use Hyper-V from Windows Server 2019. However, the process is very similar in Windows 10. Therefore, you can use the steps for both systems.

Installing Ubuntu on Windows Server using Hyper-V

In today’s post we will see how to install Ubuntu in a virtual machine step by step. In the first place you must download the image from this link. Then press Win+Q and type Hyper-V to launch the manager.

As this is the first time the tool is launched, you can see that there are no virtual machines created. Therefore, we are going to create the first one. With this in mind, select the server or machine. Next New>Virtual Machine

Configuring the virtual machine.

An assistant will be launched immediately. You can press Finish to create a virtual machine with default values. Or you can press Next to customize the settings. In this case, press Next to continue.

It is then time to specify the name of the new virtual machine. It is also possible to set the location of the virtual machine. When you are ready, press Next to continue.

Hyper-V offers two generations of virtual machine configuration. Generation 1 is for older installations. Generation 2 offers features for more modern machines. You can choose any of them according to your needs.

Assigning Ubuntu installation values in Hyper-V.

Now it is time to specify the amount of ram memory intended for the virtual machine. By default, the wizard assigns the recommended minimum to run the system. However, it is recommended to assign a little more so that everything flows smoothly. On the other hand, this amount will also depend on the amount of physical ram memory the computer has. In addition, the platform provides the option of using dynamic ram memory. That is, beyond the assigned memory, Hyper-V assigns memory according to the needs of the virtual machine.

Then configure the network connectivity. That is, if you want to enable the Internet connection, please enable the physical network device to act as a switch.

Now it’s time to configure the virtual hard disk. The wizard offers 3 options. The first one is to create a new disk with its assigned size. Besides that you can use a previously created virtual hard disk. Finally, you have an option to assign a virtual disk later.

This point you have to configure the values for the Ubuntu installation. That is, the source to boot the system. In this case, we will use the previously downloaded ISO.

Finally, a summary of the installation is shown. If you are satisfied with all the elements, then press Finish to begin the installation.

Running Ubuntu 20.04.1 in Hyper-V

Once the installation is finished, it is time to run Ubuntu 20.04.1 for the first time. This process is composed of two steps. In the first place you must turn on the virtual machine, and then click on connect.

Finally, the process is over. In this way we have seen how to install Ubuntu 20.04.1 on Windows Server/10 using Hyper-V. It is a good addition to our domestic system or business environment. See you later!

The post How to install Ubuntu 20.04.1 on Windows Server/10 using Hyper-V. appeared first on Linux Windows and android Tutorials.

How to enable the feature from Windows Server Manager

As mentioned, it is necessary to go to the Windows Server. Once there, click on Add Roles and Features.

In the following screen, click on Next.

In the type of installation, please click on role-based installation.

Then select the server from the list.

Please skip the Server Roles screen. Then under Features click on Windows Server Backup

Now, confirm the installation of the feature.

Finally, wait a few moments while installing Windows Server Backup

How to backup Windows Server 2019/2016

Once the feature is enabled, it is time to perform the first backup of the server. With this in mind, from the Windows Server, open the Tools menu and click on Windows Server Backup

Immediately the Windows Server Backup manager will be deployed. In addition, it has 3 backup options. That is, you can schedule the backup, backup once or restore a copy. This time select the Backup Once option

Then click on Next to continue.

The wizard then offers two types of support. A complete backup of the server and a customized backup of the items to be saved. For added security, select a full server backup.

Now please choose the type of backup. That is to say, local backup or in a remote folder

Now it is time to select the location where the backup will be stored.

Finally, you will see a confirmation message. Please check all parameters. Then, click on Backup to start the process.

Please note that the process may take a while, depending on the size of the backing.

Now, if there is any problem with the server, just click on the backup. Then just follow the wizard’s instructions to restore the system.

In the final analysis we have seen how to backup Windows Server 2019/2016. Please note that system stability is essential. Therefore, it is always advisable to maintain a backup in case of general failure. Okay, that’s it for now. Before I say goodbye I invite you to see our post about EDEX-UI. Bye!

The post How to backup Windows Server 2019/2016 appeared first on Linux Windows and android Tutorials.

How to create Active Directory Group in Windows Server 2019

For better administration, Windows Server classifies the groups as follows:

• Distribution groups. Used to create e-mail distribution lists
• Security groups. Implemented to assign permissions to shared resources in the domain

As for the scope of location, Windows Server classifies the groups in:

• Universal: Applies to both local and external connections
• Global: Applies to all computers and servers in the domain
• Domain local: This applies only to the local server with Windows Server 2019

Before starting to create the group it is advisable to create an organizational unit, as I show you here. The first thing you have to do is go to the Server Manager. Then, from the Tools menu please select Active Directory Users and Computer:

Then right-click on the organizational unit. Then select New>Group

A wizard will immediately be displayed to assign the group name and manage other aspects. Such as the scope and type of the group.

Finally, you can see the successfully created group:

How to add members to a group in Windows Server

There are a couple of methods to add users to a group on Windows Server. The first is through the properties of the group itself. To do this, double-click on the group and then click on the Members tab. Then click on Add.

Then enter the name of the user you want to add to the group. It is also necessary to check the name to verify the existence of the user.

Back to the previous screen you can see that the user has been added successfully. Please press OK to save the changes.

The other way to add a user to a group is through the user’s own properties. With this in mind, double-click on it and then select the Member of tab

Once again, add the name of the group and check to verify its existence:

Back to the previous window, you can see the new group added. Please click OK to save the changes.

Conclusion

At the end of the day we have seen how to create Active Directory Groups in Windows Server 2019/2016. Therefore, user management tasks are greatly facilitated. All right, that’s it for now. Stay tuned for more info on Windows Server. See you later!

The post How to create Active Directory Groups in Windows Server 2019/2016. appeared first on Linux Windows and android Tutorials.

How to install Hyper-V Windows Server 2019 from Server Manager.

Hyper-V is developed as a virtualization technology which is based on hypervisor. Consequently, it uses the Windows hypervisor, which in turn requires a physical processor. It is essential that this processor has the virtualization technology. To activate and install it, from the Server Manager click on Add Roles and Features.

Press Next to continue.

On the next screen, select the Role-based or feature-bases installation:

Now it is time to select the server where the role will be installed:

Then select Hyper-V:

Then, a confirmation window is shown below with the features that will be added.

Press Next to continue:

The following window is about installation based on features. Consequently, press Next to continue.

The wizard then displays a brief overview of Hyper-V. Additionally, it is necessary to know the network device that will be used as a virtual switch.

It is then possible to select the network adapter as a network switch. Therefore, it is necessary to mark one to guarantee the connectivity of the virtual machine.

In the following screen it is possible to configure Hyper-V to support live migration of virtual machines. That is, without having to shut down the server.

Now it’s time to set the default Hyper-V routes. It is also possible to modify them according to the administrator’s taste.

Now the wizard shows a summary of the role that will be installed. Press Install to begin the task:

The installation process will begin immediately:

Finally, it is necessary to restart the server to save the changes.

After restarting the server, you will see the Hyper-V manager available from the start menu.

Clicking on it will display the administration console:

How to install Hyper-V in Windows Server 2019 from PowerShell

On the other hand, it is possible to install this role on the server using PowerShell. With this intention, open a PowerShell with administrator privileges and run the following command:

Install-WindowsFeature -Name Hyper-V -IncludeManagementTools

Installing Hyper-V using DISM

Deployment Image Servicing and Management is a tool integrated into the server with which we manage the system images. It also allows, to install Hyper-V. To use this method, you need to open a PowerShell as an administrator and run the following command:

dism /Online /Enable-Feature /FeatureName:Microsoft-Hyper-V /All

In any case, you have to restart the server to see the established changes. Ultimately we have seen how to install Hyper-V on Windows Server. In addition, we studied the graphic mode and through PowerShell. All right, that’s it for now. Bye!

The post How to install Hyper-V on Windows Server 2019 appeared first on Linux Windows and android Tutorials.

What are the fundamental services in Windows Server 2019/2016.

The basic and fundamental services for an optimal functioning of the active directory are the following:

Active Directory Domain Services

ntds

Active Directory Web Services

adws

Distributed File System Replication (DFSR)

dnscachedns

DNS Client and Server Service

kdc

Remote Procedure Call (RPC) Service

w32time

Kerberos Key Distribution Center

kdc

Windows Time Service

dhcpdhcpserver

Net Logon Service

netlogon

Please note that in the list are the services with their name to use and their respective command.

How to execute the command to check the status of the domain controller in Windows Server 2019/2016.

To check the status of the services in Windows Server, we will use PowerShell. With this in mind, press the Win+X combination and launch it:

Once the console is deployed, run the following cmdlet to check the status of the services. Indeed, for everything to be in order, the command must show that the services are running. Otherwise, if any service is stopped, it may cause problems in the system.

Get-Service –Name NTDS, ADWS, DNS, DNScache, KDC, W32time, Netlogon, DHCP, KDC

As you can see in the picture, all services are running successfully.

Checking the status of shared folders.

Another essential task for the administrator is to validate that the SYSVOL and NETLOGON folders are shared. If not, then the group policies and logins will be invalid. With this in mind, we will use the net share cmdlet.

After running the command, we can see that the folders are indeed shared. Therefore, the elements of the active directory are working properly.

In this way we have seen how to check domain controller status in Windows Server 2019/2016. This activity takes no more than two minutes. However, it is very practical to do, as it checks the functional status of the domain controller. I don’t want to say goodbye without inviting you to see our post about how to increase privacy in Windows 10. See you soon!

The post How to check domain controller status in Windows Server 2019/2016. appeared first on Linux Windows and android Tutorials.

How to install the DNS role in Windows Server 2019/2016.

Most commonly, this role has been installed along with the Active Directory role. Most commonly, this role has been installed along with the Active Directory role. So if you have reviewed our posts on Windows Server you should already know how to do it. However, I remind you of the steps. In the first place, from the Server Manager click on Add Roles and Features

Press Next to continue

Now select the type of installation. In this case, we will use the role or feature based installation.

Please select the server where the DNS server will be installed.

Below, you can see the DNS role already installed. If not, check the box and follow the instructions in the wizard.

Setting up a DNS server in Windows Server 2019/2016.

Once the installation is verified, it is time to configure the DNS role. To do this, once again we will use the Server Manager. Once there, please enter the Tools menu. Then, click on DNS:

Then the DNS manager will be displayed. Please right-click on the name of the server. Then select Configure a DNS Server.

The DNS Server Configuration Wizard will be displayed immediately. Press Next to continue.

Now it is time to select the optimal alternative for the zone to be used on the server. If you are using small networks, then I recommend creating a forward lookup zone.

Now please set the location of the primary server. This time, the server maintains the zone.

Then assign the name of the zone.

Now it’s time to set up how to receive updates. For security reasons, I recommend using the first option.

In this option, it is possible to configure the DNS server as a temporary reseller. This is very interesting, as it allows our DNS server to query other external DNS servers. This is in the case of those records that it is not able to resolve itself. With this in mind, please add the IP address of the external DNS server.

After this step, the assistant will have finished his work. After this step, the assistant will have finished his work.

Finally you will be able to see the area created correctly. Consequently, the DNS server administration is now available on Windows Server.

Conclusion

Well, in this simple way we have seen how to install and configure a DNS server in Windows Server 2019/2016. Therefore, the administrator has this important feature. All right, that’s it for now. Before saying goodbye I invite you to see our post about activating Wi-Fi in Windows Server. See you soon!

The post How to install and configure a DNS server in Windows Server 2019/2016 appeared first on Linux Windows and android Tutorials.