What to do to improve remote connections

It is important that the performance of connections to a remote desktop is good. Otherwise, there will be continuous outages, we will not be able to work normally, and the quality will be very limited. This is what happens if we have a slow Internet speed. However, it is also due to some settings that we can touch. We are going to explain how to configure the Remote Desktop connection on Windows. In this way, we will modify some parameters for the better. For example, if your Internet connection is limited, you will have to modify some things to make the most of the available resources.

Likewise, it is advisable to improve the speed of the Internet in general. Consequently, this will help the remote desktop to work in the best conditions. You will be able to access without cuts and without quality problems when entering a computer and working on it without being physically there.

These changes can be made in the different versions of Windows. However, the reality is that it will depend a lot on the connection you have. This will be the determining point to achieve better results, since you could be limited to an inadequate speed to be able to work remotely.

Configuring the Remote Desktop connection

First, we are going to focus on the actual configuration of the Remote Desktop connection that comes with Windows. Consequently, we will modify a couple of parameters. Specifically, the speed of your connection. As well as adjusting the screen size. This can help to make the connection smoother and avoid dropouts.

Choosing the right speed

One option available is to choose the Internet speed of our connection. What we have to do is to open the remote connection. With this in mind, from the start menu, type remote desktop and launch the app. There you will see different options, and the one that interests you in this case is the Experience tab. If you click on it, you will see that you can select the connection speed to optimize performance.

This point is important. Indeed, we are going to adjust the configuration according to the available speed and also to the latency. The aim is to avoid outages and problems accessing the remote desktop. However, you can also do this manually by being able to uncheck or check the different boxes.

If your Internet connection is weak, it is best to have all the boxes unchecked. Although the quality will not be the best, you will avoid outages and problems that may occur when accessing a device remotely.

Adjust the screen size

Moreover, from the Remote Desktop Connection, you will be able to adjust the screen size. It is also interesting to avoid outages. Indeed, having one resolution or another may require limited resources. You may have problems if, for example, you have set a very high resolution and the connection is not good.

In this case, you have to go to Display and there set the size as you need. Simply drag the line to make the size smaller or larger. You will also be able to change the color quality, where you will find differences between 16 and 32 bits. The higher it is, the more resources it will need to work without cuts.

Tips to improve speed

In order for the remote desktop connection to work properly, it is also necessary to keep the Internet connection in good condition. Regardless of the configuration, you should keep in mind some general tips. We will explain what you should do to avoid outages and have good speed.

Use a good application

A significant point is to always use a good remote desktop application. There are many options available, as is the case with almost everything. However, not all of them will work the same. It is essential to choose correctly which one to use. The Windows program itself is a good option, but there are also others such as TightVNC or TeamViewer.

It is imperative that you always download the program from legitimate and official sources. For example, the official website of the application itself or use secure application stores. In this way, you will increase security and reduce the risk of using programs that may have been modified maliciously.

Upgrade PC and network card

It is essential to have the equipment correctly updated and also the network card, whether Ethernet or Wi-Fi. This will help to avoid problems that may appear, but also to optimize the available resources. In this case it is necessary to keep the Internet connection in good condition and that there are no failures of any kind.

To update Windows, you have to go to Start, you enter in Configuration and you click in Windows Update. There you will see possible pending files to install, with new versions and security patches that can have. This is something that you should do periodically and make sure that you always have the last versions.

In the case of the network card, to update the driver you have to go to Start, enter Device Manager and go to Network Adapters. There you select the appropriate card, either Ethernet or Wi-Fi, and right-click on it and click Update Driver.

Keeping the system protected

Of course, another important point is to have the system protected. This will help to avoid problems that can slow down the Internet connection and have problems using the remote desktop. Consequently, it is essential to have a good antivirus Of course, another essential point is to have the system protected. This will help to avoid issues that can slow down the Internet connection and have difficulties using the remote desktop. It is therefore essential to have a good antivirus. Windows Defender itself is a good option, but there are many other valid alternatives, such as Avast or Bitdefender. Whichever you choose, check that it works well.

However, it is not enough just to have a good antivirus to maintain system security. It is also necessary to keep your computer up to date. In addition, it is essential to maintain common sense and avoid making mistakes. For example, you should avoid installing programs that could be dangerous or downloading attachments that arrive by e-mail without verifying the source.

In order to get the Internet speed right and to be able to use the remote desktop better, it is interesting to concentrate the Internet connection. This means avoiding having many devices connected at the same time. Indeed, they will consume the available bandwidth and this can be a problem.

The same can happen in the case of installed programs. Any software can consume resources, and you could see a significant limitation in your Internet speed. Check that you do not have any application in the background that is consuming resources necessary for a good connection. Ultimately, we have seen how to improve the connection when using the remote desktop. This way, you will be able to take advantage of the full potential of this tool. See you later!

The post How to improve the connection when using remote desktop appeared first on Linux Windows and android Tutorials.

TeamViewer

TeamViewer is one of the most popular remote control solutions. Moreover, it is a tool that can be useful for any kind of users. It is actually an option for people who are professionally involved in the technical support of users. But it also works for home users. That is to say, for the average user who has had to solve computer difficulties for a neighbor or friend.

In any case, we are talking about a free application for personal use, although for businesses it also has a series of payment plans. Another of its advantages is that it is a multiplatform solution. Therefore, it has applications for the most popular desktop and mobile operating systems. There are even versions for Raspberry Pi. Some of its interesting options are the control of several computers at the same time, the recording of sessions, a chat to communicate between computers or the possibility of sending files and documents from one computer to another. In short, it is a very complete solution.

SupRemo

It is another tool that is completely free for home users. However, it has paid versions with more options for companies. One advantage is that it does not require any additional configuration on the computer. In fact, just install it, and you are ready to use it. In addition, connections are encrypted with the AES-256 algorithm.

Another interesting feature of this application is that it is a cross-platform tool. Therefore, it has applications for Windows, GNU/Linux and macOS, as well as for Android or iOS. Consequently, it allows you to connect to remote computers and desktops, with the possibility of working with multiple screens and simultaneous connections. We can also transfer files and folders between the connected computers.

Ammyy Admin

This is a very light tool, with an installer that has a minimum weight of about 1 MB. In addition, it has a simple configuration process so that users without knowledge do not have problems when using it. It has paid versions and a free version, which can only be used for 15 hours per month with a single session.

It is also not a file sharing tool and does not have any of the advanced features that some others may offer. However, if you want a lightweight tool just for occasional use, then it’s for you. You will be able to control your computer remotely without much hassle.

AnyDesk

AnyDesk works very well and is also free. Moreover, it does not require advanced knowledge. It is only necessary to have a stable Wi-Fi connection and a device with the client installed. This can be another computer or even mobile phones with Android or iOS.

One of its coolest features is that its mobile version has a series of controls adapted with advanced options with certain finger movements. Additionally, it allows you to send files remotely. It also allows you to control your mobile from your computer, although in this case, it is a function that does not work limited to some devices.

VNC Connect

This tool is mainly paid, although it has free trials for all its modalities. It also includes a free Home version but with fewer options. However, on the downside, we can say that the registration page is perplexing. It actually tries to divert you to download its trial versions.

On the other hand, the application offers you the possibility to install it on any desktop operating system. Additionally, it can also be installed on mobile clients on Android and iOS. It is therefore a very flexible tool. The tool offers remote connection to your computers, being able to send invitations to other people to access your computers, backups or blocking access to remote clients in case a device you had access to is stolen.

Zoho Assist

Zoho Assist is a cloud-based remote access and support tool. They also have a processional approach. It allows you to support customers remotely and via the web. Like some previous options, you can use it to control PCs, laptops, mobile devices or servers in just a few seconds after the connection is established.

In this case, it is mainly a pay-as-you-go tool, with rates starting at $8 per month. The cheapest plan allows a range of two sessions, and as you pay more you can use it with more devices. It also has a free plan with access for one device, but with chat, desktop application, Mac support and clipboard sharing.

Windows

Together with TeamViewer, it is one of the most used options by all Windows users. Its main advantage is that it is already installed on the system. However, we will need to have the Windows 10 Pro version. However, we need the Windows 10 Pro version. Through its configuration menu, we will be able to enter from any Windows device. We can also say that we can manage it from an Android mobile phone. To learn more about this feature, we invite you to check out our tutorial.

UltraVNC 

Another popular tool is Ultra VNC. Based on a free software client-server structure, it allows remote access to a computer and use it also from another device. Its drawback is that this protocol has been accused of not being very secure.

The biggest risk in this type of operation is that if the remote transmission is not carried out securely, it is easy for our information to fall into the wrong hands. A few months ago, Kaspersky discovered a series of security flaws in VNC servers, including Ultra VNC.

Bonus: Google Remote Desktop

Another alternative comes in the form of a web app. Google Remote Desktop allows you to control another computer from Google Chrome. We can even use it with mobile devices. Just have a Google account and that’s it. If you want to know more about this tool, I invite you to review our tutorial. Okay, ultimately, we have seen the best programs for remote desktop. See you soon!

The post The best remote desktop programs. appeared first on Linux Windows and android Tutorials.

Xrdp is an open-source implementation of RDP (Remote Desktop Protocol), the protocol used by Windows Terminal Services for native Windows desktop connectivity. The xrdp package provides RDP functionality, along with a server capable of accepting connections from rdesktop and Windows Terminal Server clients. One of the main advantages of Xrdp is that all of its communications are encrypted by default,

On the other hand, we live in an age where there is a lot of homework and remote assistance is becoming more and more important. And unfortunately, many people still use Windows, and having Ubuntu 20.04 or Debian 10 compatible with Windows for remote assistance is something that can be useful.

Install Xrdp on Ubuntu 20.04 / Debian

For Ubuntu Only:

Fortunately, the package is available from the official Ubuntu repositories but in the multiverse section.

So, open the Ubuntu repository configuration file and make sure it’s enabled

deb http://archive.ubuntu.com/ubuntu focal main restricted universe multiverse

so that it will be enabled. Save the changes if you made them and refresh apt.

sudo apt update

Ubuntu / Debian

And after that, you will be able to install Xrdp without any problems.

sudo apt install xrdp

At the end of the installation, a system service will be added that you can manage with the command systemctl.

Check the status of the service by running:

sudo systemctl status xrdp

And check that everything is OK

Configuring Xrdp on Ubuntu 20.04 / Debian 10

To increase security Xrdp requires that we create a new system user dedicated to the program.

sudo useadd xrdpuser -G sudo

And then assign a password to it:

sudo passwd xrdpuser

The application runs on port 3389 which you have to make sure to open in the Firewall.

Now you have to make some configurations in Xrdp for it, edit it.

sudo nano /etc/xrdp/xrdp.ini

And add these changes

max_bpp=128
crypt_level=low
xserverbpp=128

At the end add this one:

use_compression=yes

Save the changes, close the editor and restart the service.

sudo systemctl restart xrdp

Now any computer can remotely access your computer.

Conclusion

In this post, you learned how to install Xrdp but not only that but you make it ready to start all the remote assistance process including from the Windows system.

The post Install Xrdp on Ubuntu 20.04 / Debian 10 appeared first on Linux Windows and android Tutorials.

A Remote Desktop is a technology that allows a user to work on a computer through its graphical environment from another terminal device located elsewhere. It is used in the field of computer science to name the possibility of performing certain tasks on a computer without being physically in contact with the computer. This is made possible by software that allows one to work with the computer remotely.

Windows has an integrated Remote Desktop function and a client that is available for both Android and IOS. First, you must enable the this feature from the windows configuration, to do so follow the steps below:

Step One

Go to Settings>System>Remote Desktop, then press the enable Remote Desktop, you will be asked to confirm.

Remember your Windows user account must have a password, in case you do not have it you can create it by going to Settings>Accounts>Sign-in options>Password.

Second Step

Install Remote Desktop client app on your device you can do it from the following links:

Google Play Store
App Store

Third Step

Open the app, then press the + Add button in the upper right corner, then press Add PC. Scan the network to find the PC. Select the name of your PC and press connect. After that, you will be asked to enter the username and password for your Windows account. Finally, press connects and that’s it.

Conclusion

Without the need to install a third-party program in Windows we have this feature natively. It is worth mentioning the versatility and stability of this function we can effectively manage windows. Also, perform advanced tasks from our Android or IOS device.

Share this article with your friends. And join our Telegram Channel.

The post How to manage Windows 10 from Android or IOS (Remote Desktop) appeared first on Linux Windows and android Tutorials.

How to modify the port for the remote desktop connection in Windows Server

The main reason to modify this port is very simple. Because security is a crucial element in any server. Indeed, hackers know that port 3389 is the one used for remote connection. They can then try to access the computer to steal information or make unauthorized changes. Consequently, it is highly recommended to change this port. To do this we will modify the Windows Server Registry. With this intention, press the Win+R combination and execute the following command:

regedit

Now please follow the next path:

HKEY_LOCAL_MACHINE / SYSTEM / CurrentControlSet / Control / Terminal Server / WinStations / RDP-Tcp

Then select the value corresponding to PortNumber

Then double-click on the value. Immediately the values are displayed. Also, you can see that the value is displayed as d3d. This is because it is in a hexadecimal format. When you pass it to a decimal value, it is displayed as 3389.

Well, please edit it and add the value 6000. This will set this port. Finally, it is necessary to check a couple of steps. First, please check that the port is not blocked by the Windows Firewall. Finally, restart the server to set the changes.

Check access to the remote desktop.

Once the port is modified, it is time to check if the access to the remote desktop is correct. With this intention, please open the Remote Desktop client and enter the server name or IP address.

However, the connection will not be successful and you will see the following error message.

To access correctly, it is necessary to add the port number at the end of the IP address. For example:

192.168.30.128:6000

In this way, you will be asked for credentials to connect:

Lately, we have seen How to change the remote desktop port in Windows Server 2019, 2016. This way you can increase the security of the server. We hope that you like this. If so, please share on your social networks and don’t miss our post about How to use Active Directory Administrative Center in Windows Server 2019/2016.

The post How to change the remote desktop port in Windows Server 2019, 2016 appeared first on Linux Windows and android Tutorials.

How to enable the remote desktop with Windows Server Control Panel.

In the first place, we will enter the control panel. Once there, please follow the next path: System and Security>System>Remote Settings:

The remote access options are then displayed. As you can see, it is disabled by default. Consequently, you have to check the corresponding box. It is also highly recommended checking the box for connections with Network Level Authentication. This will ensure that only users of the domain can access the server.

On the other hand, to add specific users to connect, just click on Select Users. A list of users with accesses will be displayed immediately. To add new users, just click on Add.

How to enable the remote desktop with the Windows Server Settings

After enabling the remote desktop in the control panel, you can configure it from Windows Server Settings. With this in mind, please press the Win+I combination. Once there, please click on System.

Then, click on the Remote Desktop section. Please note that you must have enabled the option in the Control Panel. Otherwise, you will not be able to enable the switch. You can also configure remote access to the server. It is also possible to check the name of the server for remote access. In addition to defining, which users will be able to access the server using RDP. Finally, the Additional Settings allow you to go deeper into the options.

In the advanced settings screen, aspects such as: Enable authentication, configuration of external connections and the remote port to be used are handled.

Testing the remote connection between Windows 10 and Windows Server

It is time to check the remote connection. To do this, you need to log in from a Windows 10 computer and use the remote desktop utility. In the first place add the IP address or the name of the server.

After entering the user and password, the following warning message will be displayed. Please press Yes.

Then the connection process will begin.

After a few seconds, the connection to the remote server will be successfully established.

Conclusion

At the end of the day, we have seen how to enable the remote desktop in Windows Server 2019/2016. As mentioned, it is a great alternative to manage the server without being physically present. We hope we have clarified all the doubts about it. Before saying goodbye, I invite you to see our post about running applications with Windows Server startup. Bye!

The post How to enable remote desktop in Windows Server 2019/2016 appeared first on Linux Windows and android Tutorials.

Preparing the computer to install the remote google desktop

As mentioned, this is Google’s own web app. Consequently, it is necessary to use the Chrome browser or any of its derivatives. However, it is advisable to use Google Chrome directly. Additionally, it is imperative to have a Google account. Then go to this site to start the setup. After entering the Google credentials the wizard will offer to download the web app. Optionally you can install the browser extension.

After the download is approved, you just have to start the installation.

Now it’s time to name the computer. Please remember that this name will be the one you will use to connect to the host.

Next, for security parameters you must attach a 06 digit pin code to be able to connect.

Finally, the host is active to receive connections.

Preparing the client device.

From now on, you’ll be able to connect remotely to the computer. If you wish you can access it from another computer. However, this time we will connect to the remote desktop from an Android phone. With this in mind, the first thing you have to do is download the app from Play Store. Once the app is downloaded and installed, the available remote desktops will be displayed. Please note that the host computer must be connected to the network. Just click on the name of the previously assigned computer.

Then you only have to enter the security pin to be able to access.

After a few seconds you can see the Windows desktop running successfully on the Android phone.

Conclusion

Finally, we’ve seen how to control your computer remotely with Google Remote Desktop. Google promises that the connection will remain encrypted and secure. Plus, the experience is really smooth. It also allows you to manage remote desktops without installing heavy apps or difficult settings. All right, it’s been a pleasure as always. Hope to see you soon! Goodbye!

The post Control your computer remotely with Google Remote Desktop. appeared first on Linux Windows and android Tutorials.

Prerequisite.

Before allowing remote access to a Windows 10 computer, it must be prepared. In fact, for security reasons, remote access is restricted by default in Windows 10. Consequently, you have to have the server computer to accept incoming connections. This is an uncomplicated process. Just follow the steps I show you in this post.

Systems available to connect remotely to Windows 10

The Windows 10 remote connection client is currently available in the following versions:

• Windows 10 client available in the Microsoft Store.
• Android client available in Google Play.
• iOS client available on iTunes store
• MacOS client in iTunes store

How to use the android client for remote desktop

For the demonstration purposes of this post, we will use the client for android. Once downloaded and installed the client, we will get with the following welcome screen. Please press the + sign to add a remote device.

Immediately you have to add the name of the pc you want to connect to. Please note that if you have problems making the connection, then you must add the IP address of the remote desktop:

Once the data has been entered, the equipment will be added. Click on it, to start the connection process.

Thereupon, it is necessary to enter the user name and password of the equipment we want to access.

The system will then issue a warning window. Please press Connect to continue

After a few moments, you will see on the phone screen the computer desktop.

Conclusion

In the final analysis, we have seen how to access remotely to Windows 10. In this opportunity, we detail the process with the Android client. However, the method with the Windows 10 client is similar and just as simple. From now on, you have the tools to access your computer remotely. All right, that’s it for now. See you soon!

The post How to access remotely to Windows 10 appeared first on Linux Windows and android Tutorials.

How to activate the remote desktop in Windows 10.

Before starting the process, clarification is necessary. This function is not available for Windows 10 Home Edition. In the first place, enter the Windows settings by pressing the Win+I combination. Once there, press System

Then scroll down to get the Remote Desktop option.

Then turn on the Remote Desktop switch. A warning window will immediately appear to confirm the action. Press Confirm to enable the remote desktop.

And that’s it. From this moment on, the device is ready to accept remote connections. To connect, please use the name of the device that is blurred in the screenshot.

Then within the advanced configuration, verify that the network-level authentication option is activated. If you’re remotely connecting to a PC on your home network from outside of that network, don’t select this option

How to authorize access to specific users.

Next, we’re going to tighten up the security measures. In this sense, we will specify which user can connect remotely to the equipment. With this intention, from the same section of Remote Desktop, please click on the section of User Accounts.

Then press Add to include new users. Then enter the user’s name and check to see if they exist. This way, you can add users individually.

Conclusion

Finally, we have seen how to enable the remote desktop in Windows 10. In addition, I have shown you the suitable security measures to protect unauthorized access. All right, that’s it for now. Before saying goodbye I invite you to see our post about premium themes in Windows 10.

The post How to activate the Windows 10 remote desktop appeared first on Linux Windows and android Tutorials.

Enabling Telnet on Windows Server 2016/2019. Using PowerShell

To be able to use Telnet correctly we have to open a session in the destination machine. This session has to be opened with a user with access. As mentioned above, this protocol presents an important security gap. For this reason, it is disabled by default in Windows Server. It is possible to check this by running the telnet command at a command prompt:

To enable it, please open a PowerShell with administrative privileges and add the following command and press Enter:

 Install-WindowsFeature -name Telnet-Client 

Immediately start the installation:

At the end of the process we will see the following window:

Another way to enable this function is to open a CMD with administrative privileges and run the following command:

dism /online /Enable-Feature /FeatureName:TelnetClient 

Enabling Telnet graphical mode.

It is also possible to enable Telnet from the Windows Server 2016/2019 Dashboard. With this in mind, you have to enter the section Add roles and features.

Then press Next to continue.

In the next window, click on Role-based or feature-based installation:

Next, select the server you are going to add to Telnet.

Now, just press Next and skip the roles on this screen. Press Next to continue the installation.

Then scroll down and select the Telnet checkbox. You will see a brief description of the feature.

On the next screen, press Install to start the process.

Just wait a few seconds until Telnet is finally installed.

Testing Telnet.

After the process is finished, you just need to open any CMD and run the next command:

telnet

If everything is correct, you will see the next window:

To view the available subcommands, run the following command:

telnet /h

In the final analysis, we have seen how to install Telnet in Windows 2016/2019. Despite its security limitations, it is still a good option for communicating computers on private networks. That’s all for now, before saying goodbye I invite you to see our post about OrientDB in Windows 10. See you later!

The post How to enable Telnet on Windows Server 2016/2019 appeared first on Linux Windows and android Tutorials.