How to expand the RAM memory of a Windows computer?

RAM memory compatibility and capacity

Before starting the RAM expansion process, it is important to make sure that you have new memory that is fully compatible with your computer. You will also need to verify that it has the capacity you need:

• Compatibility: the compatibility of the RAM memory with the computer must be checked. With this in mind, it is necessary to consult the manufacturer’s specifications or use online tools. It is key to be certain of the type of memory. For example, DDR3 or DDR4. These are the modes that can be used in a computer. It is also necessary to know if it has additional slots available to install it.
• Required capacity: the required RAM capacity must be determined. It is important to determine the user’s needs. If you use demanding applications such as design or editing programs, you may need a larger memory capacity in addition to the type of tasks you will execute and the limit your device can tolerate.

Proceed with installation of the new RAM

First, you need to confirm the type of memory the computer is compatible with. In addition to the maximum capacity, it can tolerate. Finally, it is time to proceed with the installation of the new RAM.

• Turn off the PC and disconnect it: Before installing the RAM memory, make sure to turn off the computer and disconnect it from the power supply. This ensures safety during the installation process.
• Access the memory modules: open the computer case and locate the existing RAM modules. Additional slots may be available. If so, you will have the option to add new modules without replacing the existing ones.
• Install RAM: Carefully remove the existing RAM modules, if necessary. Now place the new modules into the empty slots. It is key to make sure to properly align the notches on the memory connector and press gently until it clicks into place.
• Reassemble the PC: put the PC case back as it was before. Then you must verify that it has been well-adjusted. Finally, connect the computer to the power supply and turn it on.

RAM configuration and verification

After installing the new RAM, it’s important to configure it correctly and verify its operation. To do this, you should perform the following actions:

• RAM recognition: Usually the Windows operating system will automatically recognize the new RAM. However, it may be that if the system does not show the total capacity. Then you have to make a check using the Task Manager.
• RAM configuration in the BIOS: In some cases, it may be necessary to access the BIOS settings. This is to enable full detection of the new RAM memory. This will require a reboot of the PC. Then, during the boot process, press the key indicated on the screen to enter the BIOS. Once there, look for the option that relates to RAM memory configuration and ensure that it is enabled.
• Performance tests: After configuring the RAM correctly, you should perform performance tests. This is to verify that the computer is using the full capacity of its new memory. Demanding applications should be run. Or perform intensive tasks to make sure that the PC’s performance has really improved.

In conclusion, expanding the RAM memory in a Windows PC is an excellent way to improve its performance and responsiveness. By following the above steps, you will be able to select the right RAM memory.

It is worth reiterating that it is very important to conduct a thorough investigation. In addition to following the manufacturer’s instructions. It is always good to take all precautions when handling the internal components of the computer. This will ensure that the component will work optimally.

The post How to expand the RAM memory of a Windows computer? appeared first on Linux Windows and android Tutorials.

How to check for empty RAM slots

As with everything in life, there are several methods to find out exactly which slots are available. In addition, in some cases we can find out a lot more data that can be especially useful. We will see numerous methods, some by software and others by hardware. The best thing is that in most cases the result is successful. However, it is therefore best to have options to compare and be sure that the information is correct.

With Windows

The easiest way is to use Windows 10 or Windows 11. But at the same time it is the most basic and the one that less information contributes. For it is as simple as to press the right button of our mouse in the task bar so that the following menu is shown. Alternatively, you can press the combination Win+X.

It can also be achieved by pressing the Control + Alt + Delete keys. Next, click on the Task Manager. This way, you can know the empty RAM slots that your PC or laptop has in task manager, and it will open. At this point, we will have to go to the performance tab. Once there, click on the memory section, as shown in the following image.

In this section, at the bottom right, Windows 10 will indicate how many slots we have used. In my particular case, I still have one slot available. But in addition, our OS indicates the reserve we have for the integrated graphics and the speed of the same. If we need more specific information for a replacement of our memories or an expansion, we will need to know the exact modules, both their serial numbers and their latencies.

View empty RAM slots with CPU-Z

In this aspect, we can resort to more specialized programs without having to open our laptop or computer. For this, we recommend using the CPU-Z software. There you will find everything you need to download and set it up. The download and installation procedure is elementary. In fact, it behaves like almost any other Windows program. Once run, just click on the SPD tab. From there, this small but powerful program provides us with all possible data. In our particular case, we will see the following:

Correctly, our CPU-Z tells us that our modules are Micron Technology branded. Furthermore, its speed is 666MHz at 150V. We can go jumping between banks if we set the upper tab, so we will see what type of module has each slot in particular. This is the specific memory section where each slot will mark the model, type, serial number or latency. However, the way to know if we actually have free slots is precisely by changing the slot in the drop-down menu of this section.

If the program can read the SPD from the RAM, it will mark the data. If it is empty, the data will be blank, so it is a very intriguing way to see the empty RAM slots and especially to know which ones have a specific module installed. In the Memory section of the same program, we can see if we have Dual Channel or Quad Channel configuration. This depends on the platform. Because it is one thing to have two or four modules, and another that they are well-placed to enable these key technologies.

AIDA64 Extreme

Another equally valid and more powerful method is to use the AIDA 64 software, a much more complete program than CPU-Z. It also has a trial version that can be used free of charge. We recommend the Extreme version as it is more specialized and has specific options, although for checking how many empty RAM slots our PC has, it is not influential as such.

Assuming that we have our software already registered, accessing the summary menu we will have the same information that CPU-Z gave us. However, we will have many more options, test, benchmark and general information of our equipment. For the ones that concern us, we will see something similar to this:

Where we will also see details such as the type of memory (DDR3 in SO-DIMM format) which we cannot see with CPU-Z. There is more information available here, for example, in the Motherboard section, which is inside the equipment section. Here we have the most reliable information for what we are looking for, since it will indicate the type of bus, the bus width and above all the RAM slots supported by the motherboard.

Physically check your PC or laptop

This is either the simplest or the most complicated method, depending on the type of computer we are talking about. If you want to know how many modules you have installed or how many you can install in your PC, and it has a tower with a window, just look at it and see it in a second. This in laptops involves disassembling a cover or the entire bottom structure of the laptop to access the RAM. In this case, we will not only see the modules and get to know them thoroughly, but we will also see the empty RAM slots in our laptop.

It’s not the easiest thing to do, and in the case of disassembling the entire lower housing it may mean loss of warranty according to the manufacturer. However, you won’t find anything more reliable than that at the same time. OK, ultimately, we’ve seen how to know the empty RAM slots of your PC. Bye!

The post How to know the empty RAM slots of your PC appeared first on Linux Windows and android Tutorials.

Types of RAM

There are different types of RAM:

• SRAM Memory
• DRAM Memory
• VRAM Memory
• ROM memory
• EPROM memory

Certainly each has its role. Additionally, they are installed in different slots (DDR1, DDR2, DDR3 or DDR4). However, an essential piece of information is the frequency or speed expressed in MHZ.

How to know the RAM memory frequency with Task Manager in Windows 10

The first thing you need to know is that there are several factors that influence RAM speed. Let’s look at some of them:

• The assigned frequency
• Bandwidth
• Total number of channels
• Dual data rate (DDR)
• Latency
• Processor speed.

Well, let’s see how to use the task manager to determine this value. Accordingly, press the Control+Shift+Esc combination to open it. Next, click the Performance tab and then Memory.

How to know the RAM frequency with CMD

The system symbol allows you to perform administrative tasks. You can also access detailed information about the system. For this purpose, we will use a command called wmic (Windows Management Instrumentation Command-line). This command pursues the administration of automatic and scripted tasks. Additionally, it allows displaying hardware-specific information. The first thing we have to do is launch a CMD as administrators from the start menu.

Once there, just run the following command:

wmic MemoryChip get BankLabel, Capacity, MemoryType, TypeDetail, Speed, Manufacturer

We see many details of the RAM. However, look at the Speed value to determine the frequency speed. Additionally, to check only this value, then we will use this command:

wmic MemoryChip get Capacity, Speed

How to know the RAM memory frequency with PowerShell

This task can also be done from PowerShell. So please execute the following command:

Get-WmiObject win32_physicalmemory | Format-Table Manufacturer,MemoryType,Banklabel,Configuredclockspeed,Devicelocator,Capacity,Serialnumber -autosize

Please note that to launch a PowerShell you only have to press the Win+X combination. And then select the corresponding option.

Okay, so we have seen several ways to know the RAM frequency in Windows 10. This allows knowing more about the hardware status of the computer. See you soon!

The post How to know the RAM memory frequency in Windows 10 appeared first on Linux Windows and android Tutorials.

How to run the RAM diagnostic tool in Windows 10

As mentioned above, the standard test is run by default. This test takes approximately 30 minutes to run. Well, to start the process please press the Win+R combination. Once inside the run box, please type mdsched.exe

Immediately a window will be displayed where you have to restart the computer to check for problems.

Please wait a few moments while the computer restarts. Then the tool will begin its work.

To enter the options, please press F1. There you can move between the different types of tests.

Once the tool is finished, it will show the possible errors. If not, the system will reboot as usual.

Conclusion

At the end of the day, we have seen how to run the ram diagnostic tool in Windows 10. This application is very useful to determine possible failures in this hardware. Besides, it is a Windows application so you don’t have to download anything else. All right, this is all for now, before I say goodbye I invite you to see our post about sharing internet from Android to a PC. Bye!

The post Run RAM Diagnostic Tool in Windows 10 appeared first on Linux Windows and android Tutorials.

Shut down the most RAM-consuming applications

With this intention, enter the task manager by pressing the combination Ctrl+Alt+Esc. Once there, click on Memory.

This way, the apps that are consuming more RAM memory will be shown in an orderly way. Well, right-click on the app. Finally, select End Task to close it and release ram immediately.

Disables applications that are started with the PC

The second method is to remove applications that start with Windows. This allows you to save RAM from the beginning and get a faster boot. With this in mind, again access the task manager by pressing the combination Ctrl+Alt+Esc. Once there, select the Startup tab

This window shows the apps that start together with Windows. Also, you can see the impact they have on the system startup. Therefore, right-click on the program to disable the startup. From this moment on, the program will not start together with Windows.

Clean your web browser

It is a fact that web browsers consume a lot of ram memory. For that reason, it is recommended to clean it from extensions that you do not use. It is a fact that web browsers consume a lot of ram memory. For that reason, it is recommended to clean it from extensions that you do not use. With this intention enter the browser settings and scroll down to the extensions. Then select the extensions you no longer use and disable them from the browser.

Close down the sites that are consuming the most ram.

Another step to try is to close the pages that are consuming more ram memory in the browser. To do this, enter the task manager of the browser. Once there, inside the memory tab please check which site has a high consumption. Then select the process and click on End task.

Remove unused applications

Sometimes some applications consume a lot of ram memory. Consequently, the user constantly disables them. If this is the case, please check whether it is worth keeping the problematic software. With this in mind, please press the Win+I combination to enter the Windows features. Then open the application section.

A window with the list of installed apps will be displayed immediately. Select the program and click on Uninstall.

Now, if you scroll down in this window, you will see the Program and Features option. This is the classic Windows uninstaller. On the other hand, there are programs that resist being uninstalled by the previous menu. Therefore, if you have problems, you can go here.

Reboot your computer

Every time you restart the computer, the ram memory will be restarted. Consequently, you can always choose this last option. However, to prevent data loss, please save all work. Finally, from the start menu, press the reboot option.

Conclusion

Finally, we have seen some tips to free up ram memory in Windows 10. From now on you can increase the speed of your system. Please remember to check the task manager to take care of the consumption. All right, that’s it for now. Before I say goodbye I invite you to see our post about the latest Microsoft update policy. Bye!

The post How to free up ram memory in Windows 10 appeared first on Linux Windows and android Tutorials.