I cannot change the network adapter options in Windows Server 2019/2016. How to fix it.

roger — Thu, 10 Dec 2020 22:25:00 +0000

Hello! Windows Server is a safe and comprehensive operating system. In fact, it is full of roles and functions that facilitate administration. However, some configurations must be stable. In that category enter the network configurations. Logically, from this section files and resources are shared for users. However, if the IP address is changed, then the network configuration of the server changes. As a result, network management services are disabled. Under those circumstances, the action of the server administrator is necessary. In fact, only with these privileges is it possible to check the current status of the connection. In addition to other tasks such as setting the static IP address and adjusting DNS. However, access to the resource is likely to be limited. Then the user cannot change the network adapter options in Windows Server 2019/2016. Don’t worry, we’ll tell you how to fix it!

Entering the network adapter configuration.

Recently my server connection started to show flaws. As a result, there was a change in the IP address. This resulted in limited access to the network. For that reason, I started trying to solve the problem. Consequently, I wanted to go in and check the network properties. But when trying to modify the properties of the adapter, the following error message jumped.

The User cannot access the properties of the network adapter.

After several minutes of research, I was able to find the solution. In the first place, click on Network and Sharing Center.

Please click on Network and Sharing Center.

A section of the Control Panel will be immediately displayed. Please click on Change Adapter Settings.

Please click on Change Adapter Settings.

From there it is possible to access the properties of the adapter. And as a consequence, carry out the management tasks. However, the ideal is to open this option directly using the first step mentioned.

Changing the properties of the network adapter.

How to change network adapter properties in Windows Server 2019/2016

To enable this control definitively, we will use the Windows Server policy editor. With this in mind, press the Win+Q combination and type in the following:

gpedit.msc

Opening the server’s group policy editor

Once there, please follow the next path: Computer Configuration>Windows Settings>Security Settings>Security Options. Now, please scroll down to get the so-called policy: User Cccount Control: Admin Approval Mode for Built-In Administrator Account. Then double-click on it to edit it.

Please edit the policy

As you can see, the policy is disabled. Consequently, you only have to enable it.

Enabling policy.

Then, you just have to restart the server to set the changes. After that, you can access the properties of the adapter directly.

Finally it is available the access to the properties of the network adapter in Window server

Ultimately we have been able to resolve the error I cannot change network adapter options in Windows Server 2019/2016. This speeds up the management of the server. Please note that it should be as smooth and stable as possible. All right, that’s it for now. See you later!

The post I cannot change the network adapter options in Windows Server 2019/2016. How to fix it. appeared first on Linux Windows and android Tutorials.

How to install and configure a DNS server in Windows Server 2019/2016

roger — Sat, 12 Sep 2020 21:15:00 +0000

Hello, how are you? Today we will continue to explore the functionalities of Windows Server. Specifically, we will talk about one of the most important roles. Indeed, a DNS server is of paramount importance within the system. Since this role, it has the function of translating IP addresses into domain names and vice versa. As a result, the functionality of the server will be considerably increased. Well, let’s see how to install and configure a DNS server in Windows Server 2019/2016.

How to install the DNS role in Windows Server 2019/2016.

Most commonly, this role has been installed along with the Active Directory role. Most commonly, this role has been installed along with the Active Directory role. So if you have reviewed our posts on Windows Server you should already know how to do it. However, I remind you of the steps. In the first place, from the Server Manager click on Add Roles and Features

Add roles and features

Press Next to continue

Now select the type of installation. In this case, we will use the role or feature based installation.

Please select the type of installation

Please select the server where the DNS server will be installed.

Select the server

Below, you can see the DNS role already installed. If not, check the box and follow the instructions in the wizard.

Setting up a DNS server in Windows Server 2019/2016.

Once the installation is verified, it is time to configure the DNS role. To do this, once again we will use the Server Manager. Once there, please enter the Tools menu. Then, click on DNS:

Please click on DNS

Then the DNS manager will be displayed. Please right-click on the name of the server. Then select Configure a DNS Server.

Start configuring the DNS server.

The DNS Server Configuration Wizard will be displayed immediately. Press Next to continue.

Now it is time to select the optimal alternative for the zone to be used on the server. If you are using small networks, then I recommend creating a forward lookup zone.

Select the appropriate search area type.

Now please set the location of the primary server. This time, the server maintains the zone.

Please set the location of the primary server.

Then assign the name of the zone.

Now it’s time to set up how to receive updates. For security reasons, I recommend using the first option.

Select the mode to receive updates.

In this option, it is possible to configure the DNS server as a temporary reseller. This is very interesting, as it allows our DNS server to query other external DNS servers. This is in the case of those records that it is not able to resolve itself. With this in mind, please add the IP address of the external DNS server.

Please add the IP address of the external DNS server.

After this step, the assistant will have finished his work. After this step, the assistant will have finished his work.

Finally you will be able to see the area created correctly. Consequently, the DNS server administration is now available on Windows Server.

Conclusion

Well, in this simple way we have seen how to install and configure a DNS server in Windows Server 2019/2016. Therefore, the administrator has this important feature. All right, that’s it for now. Before saying goodbye I invite you to see our post about activating Wi-Fi in Windows Server. See you soon!

The post How to install and configure a DNS server in Windows Server 2019/2016 appeared first on Linux Windows and android Tutorials.