What is PRTG ?

PRTG is a comprehensive network monitoring tool. It is easily install in minutes and configure quickly. This software needs credentials to access devices in network. It automatically installs devices with some default sensors, for example Ping sensor. Because for this sensor no credentials are required.

How PRTG Works?

PRTG collects real time network data using more than 250 pre-defined sensors and show them in a graphical view for better understanding and pro active monitoring. It auto discover network devices with sensors and auto configure them. These sensors are used to poll statistics from monitored devices i.e., response time, processor/memory/bandwidth usage etc

What PRTG can monitor?

Key Features

Installation Requirements

A PC or Server with at least dual core CPU and 2GB RAM. It can also be installed in a virtual machine, but there is recommended limit on the number of sensors because of the hypervisor overhead.

Installation Steps of PRTG

PRTG offer unlimited versions for 30 days. After 30 days, it reverts to free version.

1. Download Free Version from following link https://www.paessler.com/
2. A license key will be generated for trial version.

3. Run setup file as Administrator.

4. Select Language.

5. Accept the Agreement.

6. Enter Email Address.

7. Unpacking files.

8. After installation, services are starting.

9. By default, username and password is prtgadmin.

10. Auto discovery will start run automatically based on predefined sensors.

11. Click on Home button and it will show dashboard. You can change default prtgadmin password by clicking on Change Default Password.

12. Insert new password and click on Save button.

13. Switch to SSL/TLS for secure Web Browser.

14. Click Yes to switch SSL/TLS.

15. Once click to enable SSL/TSL, core services will be restart.

16. Proceed to site.

17. Installation completed.

The post PRTG – Graphical Network Monitoring In Windows Server appeared first on Linux Windows and android Tutorials.

In this tutorial, we’ll be using a tool named “iftop” (Interface TOP). It’s a real-time bandwidth monitoring tool that works on the CLI. This tool will show you real-time network usage every 2, 10 & 40 seconds. Let’s get started.

Install iftop

This tool requires two dependencies – libpcap and libncurses. So, before installing the original software package, install them first. Use the following commands:

$ sudo apt install libpcap0.8 libpcap0.8-dev libncurses5 libncurses5-dev  [For Debian/Ubuntu]
# yum  -y install libpcap libpcap-devel ncurses ncurses-devel             [For CentOS/RHEL]
# dnf  -y install libpcap libpcap-devel ncurses ncurses-devel             [For Fedora 22+]

After the dependencies are installed, it’s time to install the real software. Use the following command(s) according to your Linux distro.

$ sudo apt install iftop                  [For Debian/Ubuntu]

# yum install epel-release
# yum install  iftop                      [For RHEL/CentOS]

# dnf install iftop                       [For Fedora 22+]

If your distro isn’t shown here, you can download and compile “iftop” for your distro. Download the latest TAR.GZ file from the site. Then, follow the commands in the downloaded file’s directory.

# tar -zxvf iftop-0.17.tar.gz
# cd iftop-0.17
# ./configure
# make
# make install

Iftop usage

To start iftop, run this command in the terminal.

# sudo iftop

Here’s a sample output. Remember, iftop is a CLI tool.

If you need to monitor any specific network interface, you have to identify the target attached network interfaces on your Linux. Use these commands to identify all the attached network interface.

# sudo ifconfig
OR
# sudo ip addr show

Then, use this command to run iftop monitoring specifically the network interface. For example, if you have to monitor “wlp2s0”, use this command:

# sudo iftop -i wlp2s0

For turning on port display, use this command:

# sudo iftop -P wlp2s0

In order to disable hostname lookup, use “-n” flag.

# sudo iftop -n  eth0

Additionally, you can use “S” or “D” to show “sources”, “destination” etc. For the in-depth and detailed explanations and tricks of commands, use this command to view the integrated tutorial.

man iftop

After you’re satisfied, you can turn off iftop by pressing “q” in the terminal window.

If the default screen of the terminal is scary, try out some of the best terminal emulators for Linux. It’ll help you relax a lot.

The post How to Monitor Bandwidth on Linux appeared first on Linux Windows and android Tutorials.